Could ancient Egyptians hold the key to 3D printed ceramics?
Egypt

Could ancient Egyptians hold the key to 3D printed ceramics?


** UWE Bristol**
Press Release

Could ancient Egyptians hold the key to 3D printed ceramics? 

A 7,000 year old technique, known as Egyptian Paste (also known as Faience), could offer a potential process and material for use in the latest 3D printing techniques of ceramics, according to researchers at UWE Bristol.

Professor Stephen Hoskins Director of UWE’s Centre for Fine Print Research  and David Huson, Research Fellow, have received funding from the Arts and Humanities Research Council (AHRC) to undertake a major investigation into a self-glazing 3D printed ceramic, inspired by ancient Egyptian Faience ceramic techniques.  The process they aim to develop would enable ceramic artists, designers and craftspeople to print 3D objects in a ceramic material which can be glazed and vitrified in one firing.

The researchers believe that it possible to create a contemporary 3D printable, once-fired, self-glazing, non-plastic ceramic material that exhibits the characteristics and quality of Egyptian Faience.

Faience was first used in the 5th Millennium BC and was the first glazed ceramic material invented by man. Faience was not made from clay (but instead composed of quartz and alkali fluxes) and is distinct from Italian Faience or Majolica, which is a tin, glazed earthenware. (The earliest Faience is invariably blue or green, exhibiting the full range of shades between them, and the colouring material was usually copper). It is the self-glazing properties of Faience that are of interest for this research project.

Current research in the field of 3D printing concentrates on creating functional materials to form physical models. The materials currently used in the 3D printing process, in which layers are added to build up a 3D form, are commonly: UV polymer resins, hot melted 'abs' plastic and inkjet binder or laser sintered, powder materials. These techniques have previously been known as rapid prototyping (RP). With the advent of better materials and equipment some RP of real materials is now possible. These processes are increasingly being referred to as solid 'free-form fabrication' (SFF) or additive layer manufacture. The UWE research team have focused previously on producing a functional, printable clay body.

This three-year research project will investigate three methods of glazing used by the ancient Egyptians: ‘application glazing’, similar to modern glazing methods; ‘efflorescent glazing’ which uses water-soluble salts; and ‘cementation glazing’, a technique where the object is buried in a glazing powder in a protective casing, then fired. These techniques will be used as a basis for developing contemporary printable alternatives

Professor Hoskins explains, “It is fascinating to think that some of these ancient processes, in fact the very first glazed ceramics every created by humans, could have relevance to the advanced printing technology of today.  We hope to create a self-glazing 3D printed ceramic which only requires one firing from conception to completion rather than the usual two. This would be a radical step-forward in the development of 3D printing technologies. As part of the project we will undertake case studies of craft, design and fine art practitioners to contribute to the project, so that our work reflects the knowledge and understanding of artists and reflects the way in which artists work.”  

The project includes funding for a three-year full-time PhD bursary to research a further method used by the Egyptians, investigating coloured ‘frit’, a substance used in glazing and enamels. This student will research this method, investigating the use of coloured frits and oxides to try and create as full a colour range as possible. Once developed, this body will be used to create a ceramic extrusion paste that can be printed with a low-cost 3D printer. A programme of work will be undertaken to determine the best rates of deposition, the inclusion of flocculants and methods of drying through heat whilst printing.

This project offers the theoretical possibility of a printed, single fired, glazed ceramic object - something that is impossible with current technology.

Editor’s notes

Project title
The project: “Can Egyptian Paste Techniques (Faience) Be Used For 3D Printed, Solid Free-form Fabrication of Ceramics?” has received funding of £ 385,672 from the Arts and Humanities Research Council for the three year research project.

The Arts and Humanities Research Council (AHRC) funds world-class, independent researchers in a wide range of subjects: ancient history, modern dance, archaeology, digital content, philosophy, English literature, design, the creative and performing arts, and much more. This financial year the AHRC will spend approximately £98m to fund research and postgraduate training in collaboration with a number of partners. The quality and range of research supported by this investment of public funds not only provides social and cultural benefits but also contributes to the economic success of the UK. For further information on the AHRC, please go to: www.ahrc.ac.uk 
Stephen Hoskins is the Hewlett Packard Professor of Fine Print and Director of the Centre for Fine Print Research at UWE Bristol. Apart from being a practising printmaker, his primary areas of research are; the potential of 3D printing and related digital technologies for the arts, plus the tactile surface of the printed artefact and its consequences for digital technology. His latest book 3D Printing for the Visual Arts (Technology That Crosses Both Art and Industry) is due to be published by Bloomsbury in early 2013. 

David Huson is a Research Fellow at the Centre for Fine Print Research leading research in the field of 3D rapid prototype printed ceramics. He has given over sixteen peer reviewed conference papers at international conferences, including three focal papers at the IS&T Digital Fabrication Conferences 2007, 2008, 2009. David will moderate the NIP28/Digital Fabrication 2012 roundtable on 3D print in Quebec in September 2012. He has an extensive industrial background, working in research and development in the ceramics industry for 20 years as a ceramic engineer, and as company director for Enoch Wedgwood Ltd, Infrared International Engineering, Phoenix Ceramics and the Moira Pottery Co. 




- Publication Of ‘heritage In Health’ Best Practice Guide
UCL Museums (Linda Thomson) The publication, ‘Heritage in Health: A guide to using museum collections in hospitals and other healthcare settings’, has just been launched online by UCL Museums & Collections.  This illustrated 24-page guide...

- Online Article - Egyptian Faience
Article Study Introduction From the inception of faience in the archaeological record of Ancient Egypt, the elected colors of the glazes varied within an array of blue-green hues. Glazed in these colours, faience was perceived as substitute for blue-green...

- Synchrotron Probes Egyptian Beads
ABC Science (Dani Cooper) Not content with managing the household it appears women in Ancient Egypt were also keeping the budget in the black with some home-based manufacturing. That is the conclusion an Australian team has drawn by using synchrotrons...

- Informal Book Review - Egyptian Faience And Glass
I brought a number of Shire Publications books away with me. They can be read in a couple of hours (they average about 64 pages long), are written by some excellent authors and stuff a lot of useful information into a digestible package. Most of them...

- Journal Of Archaeological Science
Science Direct The most recent issue of JAS (October 2007, Volume 34, Issue 10, Pages 1555-1762) is available online. Abstracts are free of charge and full papers are available to purchase as downloads in PDF format. In this issue there is a paper about...



Egypt








.